Set User Code(S) - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 160 Tuesday, January 25, 2000 3:03 PM
User Tools
No. Mode
13 Direction(Page) You can select the page numbering direction at power on in
14 Position(Page)
4
15 Make/Chg.
Pattern

6. Set User Code(s)

User Codes
If user codes are turned on, operators must input their user codes before they can
operate the machine. The machine keeps count of the number of copies made under
each user code. Turn this function on with the "Set User Code(s)" user tool. You can
also turn on Key Operator Code mode so that only the key operator (administrator)
can use the functions below.
1 Check Counter
160
Description
Page Stamp mode.
Note
Default:
• When you select "P1,P2" or "1/5,2/5" with the
"Type(Page)" user tool: Upper Right
• When you select "-1-,-2-" with the "Type(Page)" user
tool: Down Center
You can edit the page numbering position.
Note
Default: See ⇒ P.174 "5-14 Position (Page)".
Available settings: See ⇒ P.174 "5-14 Position (Page)".
Reference
For how to adjust the page numbering position, see ⇒
P.174 "5-14 Position (Page)".
Make your own background pattern in Make-up mode.
Note
You can edit the 40 preset patterns.
Reference
For how to change the background pattern, see ⇒ P.175
"5-15 Make/Chg. Pattern".
You can check the number of masters and copies made
under each user code.
Reference
For how to check the number of masters and copies,
see ⇒ P.176 "6-1 Check Counter".