What To Do If Something Goes Wrong; If Your Machine Does Not Operate As You Want - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 179 Tuesday, January 25, 2000 3:03 PM
5. What to do If Something
If Your Machine does not Operate as You
Want
If a malfunction or a misfeed occurs, the following messages will appear on the
panel display.
Message
Check the original di-
rection.
Size of original and
paper is not the same.
Set original.
Max. quantity: ****
Min. quantity: ****
Drum unit is not set.
Set Drum unit.
Communication error
Turn the main switch
off then on
Meaning
The paper is not placed in the same direction as the original.
Place the original in the same direction as the paper.
If you press the {Print} key, the selected paper will be used for
printing.
Set a paper size that matches the reproduction ratio you have
selected and your original.
The reproduction ratio selected by Auto Magnification Selec-
tion mode is too big or too small.
Note
You can make prints if you press the {Print} key.
Make prints after confirming whether there is an original on
the exposure glass (contact glass).
Make sure that you have changed the original on the exposure
glass (contact glass) before pressing the {Start} key.
The number of prints exceeds the maximum print quantity.
You can change the maximum number of prints that can be
made in one operation with the user tools. See "Max. Quanti-
ty" ⇒ P.149 "2. Set Operation Mode".
The number of prints does not exceed the minimum print
quantity.
You can change the minimum number of prints that can be
made in one operation with the user tools. See "Min. Quanti-
ty" ⇒ P.149 "2. Set Operation Mode".
Slide in the drum until it clicks.
Make sure that the drum is completely set in position.
Turn the main switch off and on.
If the message appears again, contact your service representa-
tive.
Goes Wrong
179