Table of Contents
Advertisement
When there is a paper misfeed, the Check whether the
the copy counter's "PE" indicator is lit.
R
When removing misfed paper, do not touch the fus-
Caution:
ing section because it could be very hot.
Note:
When you clear a misfeed, be careful not to touch the blue
material (OPC).
Do not leave any torn scraps of paper within the copier.
After removing the misfed paper, make sure that all units are returned to
their original positions and the top unit is closed.
When a paper misfeed occurs, the copier keeps track of the selected copy
modes and how many copies have been completed. It is not necessary to
reset the copy modes and the copy quantity after removing misfed paper.
Repeat the procedures described in this section until the Check Paper Path
Y
indicator goes out. (The indicators do not function unless the top unit is
closed.)
Do not touch the copy image when removing misfed paper — toner may
stain your hands.
When The Copy Counter's "PE" Indicator Is Lit
1
Pull up a little and out the paper
cassette and check if paper re-
mains in the cassette.
CLEARING MISFEEDS
CLEARING MISFEEDS
Y
indicator or
39
Advertisement
Table of Contents
