Pencil Mode Printing - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 57 Tuesday, January 25, 2000 3:03 PM
I
Press the {Start} key.
J
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key (see ⇒ P.34 "Adjusting
the Position of Printed Images").
K
Make your prints.

Pencil Mode Printing

Note
Originals written in pencil should
be set on the exposure glass (con-
tact glass).
A
Press the [Original] key.
Selecting a Mode to Match Your Original
B
Select [Pencil] with the [←] or {~}
key.
C
Press the [OK] key.
D
Set your original on the exposure
glass (contact glass).
E
Press the {Start} key.
F
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key (see ⇒ P.34 "Adjusting
the Position of Printed Images").
G
Make your prints.
1
57