Class Mode-Making Fixed Numbers Of Prints From The Same Original - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 69 Tuesday, January 25, 2000 3:03 PM
Class Mode—Making Fixed Numbers of
Prints from the Same Original
Use the {Class} key to make sets of
prints from the same original. The
same numbers of prints are made for
each set.
R
Note
When you choose Class mode, Job
Separation mode is automatically
turned on. The job separator pulls
the top sheet of the each set deliv-
ered to the paper delivery tray to
mark the end of each printed set.
The next cycle begins automatical-
ly. See ⇒ P.85 "Job Separation—Sep-
arating Printing Sets in the Paper
Delivery Tray".
You can cancel Job Separation
mode in Class mode with the user
tools. See "Auto Separate" ⇒ P.152
"4. Mode Setting".
A
Press the {Class} key.
Class Mode—Making Fixed Numbers of Prints from the Same Original
R R R
R R R
GRCLAS0E
1 2 3 4 5
TPES160E
B
Select [Same-NO.] with the [←] or
{~} key.
C
Press the [OK] key.
D
With the Number keys, enter the
desired number of prints for each
set.
E
Press the {q} key.
1
69