Originals - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 14 Tuesday, January 25, 2000 3:03 PM
Operation

Originals

The machine can detect the following sizes of original set on the exposure glass
(contact glass):
1
Metric version
Inch version
If the machine cannot detect the original size properly, select the area to copy
with the {Edge Erase} key. See ⇒ P.51 "Edge Erase—Erasing Edge Margins". The
machine may not detect the original size properly when:
• Originals contain index tabs.
• Originals are OHP transparencies or are translucent.
• Originals are dark.
• Originals contain solid images.
• Originals are of sizes other those listed above.
If you do not lift the platen cover more than 30cm, 12" when you set another orig-
inal, the machine might not detect the next original size correctly.
The maximum original size you can set on the exposure glass (contact glass) is
304.8 × 432mm, 12" × 17".
If you use originals that have bold letters or solid images at the leading edges,
you might get prints with dirty edges. In this case, set the original face down
with the widest margin toward the paper delivery tray or raise the printing
speed.
Set originals after correction fluid and ink have completely dried. Not taking this
precaution could mark the exposure glass (contact glass) and cause marks to be
printed.
In most situations, set originals as shown below.
R
R
When you have an optional memory board and the original is set in a different
direction from the print paper, the machine automatically rotates the original
image by 90° to match the print paper direction.
14
A3L, B4L, A4KL, B5KL
11" × 17"L, 8 " × 14"L, 8
1
/
2
R
R
GRSETT0E
" × 11"KL
1
/
2