Power Connection; Machine Clearance - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 216 Tuesday, January 25, 2000 3:03 PM
Remarks

Power Connection

R WARNING:
• Only connect the machine to the power source described on the inside
front cover of this manual. Connect the power cord directly into a wall
outlet and do not use an extention cord.
• Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it. Do not pull it hard nor bend it more
than necessary. These actions could cause an electric shock or fire.
R CAUTION:
• Unplug the power cord from the wall outlet before you move the equipment.
While moving the equipment, you should take care that the power cord will
not be damaged under the equipment.
R CAUTION:
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
Make sure the plug is firmly inserted in the outlet.
6

Machine Clearance

Place the machine near the power source, providing clearance as shown.
Main frame
*: Paper delivery tray
1. More than 10cm, 4.0"
2. More than 60cm, 23.7"
3. More than 60cm, 23.7"
4. More than 60cm, 23.7"
216