Manual Class Mode With One Original-Making Variable Numbers Of Prints From The Same Original - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 65 Tuesday, January 25, 2000 3:03 PM
Manual Class Mode with one Original—Making Variable Numbers of Prints from the Same Original
Manual Class Mode with one Original—
Making Variable Numbers of Prints from
the Same Original
Use the {Class} key to make sets of
prints from the same original. Vari-
ous numbers of prints are made for
each set.
Note
When you set Manual Class mode,
Job Separation mode is automati-
cally turned on. The job separator
pulls the top sheet of the each set
delivered to the paper delivery
tray to mark the end of each print-
ed set. The next cycle begins auto-
matically.
Separation—Separating Printing Sets
in the Paper Delivery Tray".
You can cancel Job Separation
mode in Manual Class mode with
the user tools (see "Auto Sepa-
rate" ⇒ P.152 "4. Mode Setting").
A
Press the {Class} key.
GRCLAS2E
⇒
See P.85 "Job
1 2 3 4 5
TPES160E
B
Select [Manual] with the [→] or
{}} key.
C
Press the [OK] key.
D
Enter the desired number of
prints for the first set with the
Number keys.
E
Press the {q} key.
1
65