Clearing Misfeeds; When Is Lit - Ricoh FT2012 Operating Instructions Manual

CLEARING MISFEEDS

When there is a paper misfeed, the Check Paper Path (
d
Load Paper ( ) indicator will light.

Caution: When removing misfed paper, do not touch the fusing sec-
tion because it could be very hot.
Note: When you clear a misfeed, be careful not to touch the blue
material (OPC).
Do not leave any torn scraps of paper within the copier.
After removing the misfed paper, m ake sure that all units are returned to
their original positions and the top unit is closed.
When a paper m isfeed occurs, the copier keeps track of the selected copy
modes and how many copies have been completed. It is not necessary to
reset the copy m odes and the copy quantity after rem oving m isfed paper.
Repeat the procedures described in this section until the Check Paper Path
Y
indicator goes out. (The indicators do not function unless the top unit is
closed.)
Do not touch the copy image w hen rem oving m isfed paper — toner may
stain your hands.
d
When Is Lit:
1
Lift up slightly and pull out the
paper cassette and check if pa-
per remains in the cassette.
40
CLEARING MISFEEDS
CLEARING MISFEEDS
Y
) indicator or