Configure Lan Settings - Polycom RealPresence Group Series Administrator's Manual

Related Links
Configure Admin ID and Password
Configure Location and Time Settings
Configure LAN Properties

Configure LAN Settings

Before you can pair the Polycom Touch Control with the RealPresence Group Series system, you must
configure the LAN settings.
Procedure
1. From the Home screen, touch
2. Touch the LAN Properties tab.
3. Configure the following IP Address (IPv4) settings.
Setting
Set IP Address
IP Address
Subnet Mask
Default Gateway
4. Configure the following DNS settings.
Setting
Domain Name
Polycom, Inc.
on page 242
on page 241
on page 58
Administration.
Setting Up a Polycom Touch Control Device
Description
Specifies how the Touch Control obtains an IP address.
• Obtain IP address automatically—Select if the
Touch Control gets an IP address from the DHCP
server on the LAN.
• Enter IP address manually—Select if the IP
address is not automatically assigned.
Displays the IP address currently assigned to the Touch
Control, if the Touch Control obtains its IP address
automatically.
If you select Enter IP address manually, enter the IP
address here.
Displays the subnet mask currently assigned to the
Touch Control.
If you selected Enter IP address manually, enter the
subnet mask here.
Displays the gateway currently assigned to the Touch
Control.
If you selected Enter IP address manually, enter the
gateway IP address here.
Description
Displays the domain name currently assigned to the
touch control.
If the Polycom Touch Control does not automatically
obtain a domain name, enter one here.
240