Indicator Lights - Polycom RealPresence Group Series Administrator's Manual

Indicator Lights

Indicator lights and power sensors display when the EagleEye Director II camera system is powered on.
A light-emitting diode (LED) is integrated into the front of the EagleEye Director II camera system. These
LED lights emit colors that refer to various system states and allow you to identify the current state of the
EagleEye Director II camera system.
Figure 2:
The following table shows the LED status of EagleEye Director II camera system with its corresponding
behavior.
LED Color/State
Blue
Blinking Blue
Fast Blinking Blue
Amber
Alternate Amber and Blue
Blinking Amber
Green
Blinking Green
Fast Blinking Red
Polycom, Inc.
Configuring a Camera or Camera Control System
Behavior
Power On, EagleEye Director II camera system is in active state
Receive IR, EagleEye Director II camera system boot up
Power On, MCU is being initialized, Adjust Analytics camera status
Standby/Asleep
Software update, Factory restore, USB image update
USB plugged in
In a call
Receive IR in a call
EagleEye Director II camera system error
173