Configure Audio Output Settings - Polycom RealPresence Group Series Administrator's Manual

Configure Audio Output Settings

You can configure the audio output settings for your system.
Procedure
1. In the system web interface, go to Admin Settings > Audio/Video/Content > Audio.
2. At Audio Output, configure the settings described in the following table.
Setting
Master Audio Volume
Bass
Treble
Type
Line Out
Audio Output Meters
Recording Level
Related Links
Polycom Acoustic Fence
Audio Output Settings on page 144
Polycom, Inc.
on page 147
Description
Sets the main audio output volume level going to the
speakers.
Sets the volume level for low frequencies without
changing the master audio volume.
Sets the volume level for high frequencies without
changing the master audio volume.
Displays the current audio output type. This setting is
read-only.
Specifies how the system configures the volume for a
device connected to the line out port.
• Variable: Enables users to set the volume with the
remote control.
• Fixed: Sets the volume to the audio level
configured for the system.
Displays the audio level of the output (left and right
channels).
Note: To disable HDMI audio output when using
3.5mm audio output, do the following. In the
system web interface, go to Admin
Settings > Audio/Video/Content >
Monitors and set the Monitor 1 Enable
setting to Manual. At Video Format, select
DVI.
Sets the recording output level. Choose a value from 0
to 10; the default is 5.
This setting is available on RealPresence Group 700
systems only.
Configuring Audio Settings
145