Camera Tracking - Polycom RealPresence Group Series Administrator's Manual

Procedure
1. From the RealPresence Group Series system web interface, go to Admin Settings > Audio/
Video > Video Inputs > General Camera Settings and select the input used by the EagleEye
Producer.
Select the Automatic Image Calibration checkbox.
2. Enable Tracking.
Have one person sit so they are framed in a webcam view.
Manually Calibrate
You can realign the EagleEye Producer camera and EagleEye camera to display the best view of the
room for group framing by manually calibrating the room view.
Note: If you are using a touch panel, you need a RealPresence Group Series remote control to
manually calibrate the room view.
Before you manually calibrate the room view ensure that the EagleEye camera is properly attached to the
EagleEye Producer as shown in Set Up the Polycom EagleEye Producer.
Procedure
1. Ensure that the Make This Camera Your Main Camera video input setting in administration
settings in the Group system web interface specifies the EagleEye Producer as the main camera.
2. Turn Self View on in the local interface of the system to view the room in the self view window.
3. Press the Home
screen.
The EagleEye Producer LED changes to a fast blue blink when on the Home screen.
4. Press the Up and Down arrow buttons on the remote control to align the webcam with the
EagleEye camera to show the best room view when group framing.
5. To exit the Home screen, press any key on the remote control except the Up or Down arrow
button.
If no action is taken for five seconds, the system will automatically the Home screen. The LED
turns to blue.

Camera Tracking

The Polycom EagleEye Producer detects the people in the room and provides framing during a
conference. Frame Speaker with a Normal tracking speed and Medium view is enabled by default. When
an EagleEye Producer is connected to a RealPresence Group Series system, camera tracking starts
automatically when you initiate a call and stops automatically when you hang up from a call. You can also
manually start camera tracking in the local interface of the system. EagleEye Producer detects the people
in the room and sets up framing. You can set the tracking mode and speed, and specify the type of group
framing, which enables automatic tracking of group participants in the room and frames the active
speaker. EagleEye Producer is integrated with 4 microphones to detect the active speaker.
Polycom recommends calibrating the Polycom EagleEye Producer before adjusting camera features. For
instructions on how to calibrate the Polycom EagleEye Producer, refer to the Polycom RealPresence
EagleEye Producer User Guide at
Polycom, Inc.
button on the system remote control for five seconds to get to the Home
Polycom Support.
Configuring a Camera or Camera Control System
178