Registering With A Directory; Enable H.323 - Polycom RealPresence Group Series Administrator's Manual

Registering with a Directory

Topics:
•

Enable H.323

• Configure the Polycom GDS
• Configure the LDAP Directory Server
• Managing Favorites Contacts and Groups
• Setting Up Speed Dial
• Setting Up and Configuring Directory Servers
You can register your system with a directory to call contacts in your organization.
The system supports up to 2,000 Favorites. The following are also supported:
• Up to 200 additional contacts with presence, which appear in Favorites, when registered with Skype
for Business.
• Up to 4,000 contacts from a Polycom GDS server
• Unlimited number of contacts when the system is registered with Skype for Business.
Global and Favorites groups are supported. You can create up to 200 Favorites groups. If the system is
connected to a global directory server, it can also support up to 64 additional groups from the Skype for
Business server that display in the Favorites group.
Note: Assistance from Polycom is mandatory for Skype for Business integrations. For details, please
refer to Polycom Collaboration Solutions
Enable H.323
To use GDS in your environment, you must have H.323 enabled and registered on your RealPresence
Group Series system.
Procedure
1. In the system web interface, go to Admin Settings > Network > IP Network > H.323 Settings
and select the checkbox at Enable IP H.323.
2. Enter the required registration information as follows.
Setting
Enable IP H.323
Polycom, Inc.
or contact your local Polycom representative.
Description
Allows the H.323 settings to be displayed and
configured.
131