Pairing The Polycom Touch Control Device; Pair The Polycom Touch Control Device; Pair To A System After Setup; Unpair The Polycom Touch Control Device - Polycom RealPresence Group Series Administrator's Manual

Pairing the Polycom Touch Control Device

When you configure the Polycom Touch Control device to pair with a particular RealPresence Group
Series system, the device makes an IP connection to the system. If the connection is lost for any reason,
the Polycom Touch Control automatically attempts to restore the connection.
You can pair the Polycom Touch Control and system during initial device setup.
After you have completed Polycom Touch Control setup, you can pair to a different system using Polycom
Touch Control settings and unpair using the system web interface.
When you use a Polycom Touch Control with the system, you must be sure to update the RealPresence
Group Series software before you update the Polycom Touch Control software. Only Polycom Touch
Control software versions 4.x or later work with RealPresence Group Series systems.

Pair the Polycom Touch Control Device

You can pair the Polycom Touch Control and a RealPresence Group Series system using the system web
interface. If you do not want to pair during setup, select Pair Later. If you choose to skip pairing, many
Polycom Touch Control features are not available.
Procedure
» After selecting a language, enter the RealPresence Group Series system IP address in the
Polycom Touch Control interface and touch Connect.
Related Links
Set Up the Polycom Touch Control

Pair to a System After Setup

You can use the Polycom Touch Control to pair with a RealPresence Group Series system after running
the setup wizard.
Procedure
1. On the Polycom Touch Control Home screen, touch System.
2. Scroll to Device Connection Status and then touch the Info icon next to the system name.
3. Touch View Pairing Settings.
4. Change the system IP address and touch Connect.

Unpair the Polycom Touch Control Device

You can unpair the Polycom Touch Control and RealPresence Group Series system using the system
web interface.
Procedure
1. On the system web interface, go to Admin Settings > General Settings > Pairing > Polycom
Touch Control.
2. Disable Allow Pairing or select Forget this Device.
The RealPresence Group Series system cannot pair with any Polycom Touch Control while Allow
Pairing is disabled.
Polycom, Inc.
on page 238
Setting Up a Polycom Touch Control Device
244