Certificate Revocation - Polycom RealPresence Group Series Administrator's Manual

You can select a certificate in the list to view its contents. You can also remove a certificate from
the list by clicking Remove.
4. If needed, click Close to close the certificate section of the screen.
5. Click Save.
When you add a CA certificate to the system, the certificate becomes trusted for the purpose of
validating peer certificates.
Note: If you do not add the server certificate for the system before using the system web
interface, you might receive error messages from your browser stating that the security
certificate for the web site "Polycom" cannot be verified. Most browsers allow the user to
proceed after this warning is displayed. See the Help section of your browser for
instructions on how to do this.
Related Links
How Certificates are Used
Security Certificates for RealPresence Touch
Certificate Signing Requests
Certificate Signing Request Requirements
RealPresence Server Address Configuration in PKI-enabled Environments

Certificate Revocation

on page 111
Related Links
Create a Certificate Signing Request
Enable PKI Certificates on page 109
Configure Certificate Validation Settings
Configure the CRL Method
Configure 802.1x Authentication
Certificate Revocation
During certificate validation, your RealPresence Group Series system checks whether certificates used
for secure communications are revoked by their issuing CAs.
Your system can check certificate revocation status with one of the following standard methods:
• Certificate Revocation List (CRL): File containing a list of certificates revoked by their issuing CA.
You must manually upload CRLs to your system.
• Online Certificate Status Protocol (OCSP): Your system contacts an OCSP responder, a web
server that provides revocation status through a query/response exchange.
Related Links
Security Certificates for RealPresence Touch
Certificate Signing Requests
Certificate Signing Request Requirements
RealPresence Server Address Configuration in PKI-enabled Environments
Related Links
Configure Certificate Validation Settings
Create a Certificate Signing Request
Enable PKI Certificates on page 109
Install Certificates on page 110
Polycom, Inc.
on page 105
on page 224
on page 105
on page 106
on page 106
on page 109
on page 112
on page 100
on page 224
on page 105
on page 106
on page 109
on page 106
Securing the System
on page 108
on page 108
111