Polycom RealPresence Group Series Administrator's Manual page 265

Setting
Enable SNMP
Enable Legacy Notifications
Enable New Notifications
Version1
Version2c
Version3
Read-Only Community
Contact Name
Location Name
System Description
User Name
Authentication Algorithm
Authentication Password
Privacy Algorithm
Polycom, Inc.
Description
Enables administrators to monitor the system remotely
using SNMP.
Supports sending notifications compatible with the
legacy MIB.
Supports sending notifications compatible with the new
MIB.
Enables your system to use the SNMPv1 protocol.
Enables your system to use the SNMPv2c protocol.
Enables your system to use the SNMPv3 protocol.
Enabled by default, you can't configure other SNMPv3
settings unless this is on.
Specifies the SNMP community string for your system.
For security reasons, don't use the default community
string (public).
Note: Polycom doesn't support SNMP write
operations for configuring or provisioning
systems. The community string is for read
operations and outgoing SNMP traps.
Specifies the name of the person responsible for
remotely managing the system.
Specifies the system location.
Provides details about the system.
Specifies the User Security Model (USM) account
name for SNMPv3 message transactions. The
maximum length is 64 characters.
Specifies the type of SNMPv3 authentication algorithm
used.
• SHA
• MD5
Specifies the SNMPv3 authentication password. The
maximum length is 48 characters.
Specifies the cryptographic privacy algorithm for
SNMPv3 packets.
• CFB-AES128
• CBC-DES
System Maintenance
263