Eagleeye Producer Indicator Lights - Polycom RealPresence Group Series Administrator's Manual

Ref. Number
1
2
3
4
5
Use the USB port for any USB 2.0 device. If your RealPresence Group 700 system operates with the
Maximum Security Profile, the status display area does not display the software version or IP address.

EagleEye Producer Indicator Lights

An LED is integrated into the front of the EagleEye Producer unit. Different LED lights refer to different
system states. These allow you to identify the current system state for the EagleEye Producer system.
Detailed LED and system states mappings are shown in the following table.
LED Indicator Lights System State
LED
Blue
Blinking Blue
Fast Blinking Blue
Amber
Alternate Amber and Blue
Blinking Amber
Green
Blinking Green
Fast Blinking Red
Blink
Polycom, Inc.
Description
LED indicator light
Power sensor
Status display area
USB 2.0 port
Restore button
System State
Power On, EagleEye Producer Normal State
On, Not in a Call, Receive IR
EagleEye Producer Boot Up
Calibrate Webcam Room View
Standby - Asleep
Software update, Factory restore, USB image update
USB disk plugged in
On, In a call
On, In a call, Receive IR in a call
System error
Needs attention, Receive IR
Troubleshooting
275