Configure The Polycom Gds - Polycom RealPresence Group Series Administrator's Manual

Setting
H.323 Name
H.323 Extension (E.164)
Use Gatekeeper
Require Authentication
Current Gatekeeper IP Address
Primary Gatekeeper IP Address
Related Links

Configure the Polycom GDS

Configure the Polycom GDS
You can register your system with the Polycom Global Directory Server (GDS).
Enable H.323 on your system before you register it with this directory server.
Procedure
1. In the system web interface, go to Admin Settings > Servers > Directory Servers and select the
Polycom GDS Service Type.
2. Configure these settings on the Directory Servers screen.
Setting
Server Address
Password
Related Links
Enable H.323 on page 131
Polycom, Inc.
on page 132
Description
Specifies the name that gatekeepers and gateways use
to identify this system. You can make point-to-point
calls using H.323 names if both systems are registered
to a gatekeeper.
The H.323 Name is the same as the System Name,
unless you change it. Your organization's dial plan
might define the names you can use.
Lets users place point-to-point calls using the extension
if both systems are registered with a gatekeeper, and
specifies the extension that gatekeepers and gateways
use to identify this system.
Your organization's dial plan might define the
extensions you can use.
Turn the gatekeeper off or make it automatic.
Require authentication for IP H.323 connections.
The IP address for the current gatekeeper.
The IP address for the primary gatekeeper.
Description
Specifies the IP or DNS address of the Polycom GDS.
The Polycom GDS password, if one exists.
Registering with a Directory
132