Polycom RealPresence Group Series Administrator's Manual page 229

Procedure
1. In the RealPresence Touch web interface, go to Admin Settings > Servers > Directory Servers.
2. Configure the following settings:
Directory Servers
Supported
Microsoft
Skype for Business
Server 2015
LDAP
with H.350 or Active
Directory
Polycom GDS
* To successfully call a phone number from the LDAP directory, the phone number must be stored in one of the
following formats:
• +Country Code.Area Code.Number
• +Country Code.(National Direct Dial Prefix).Area Code.Number
You can configure the system to use the following directory server when the system is
automatically provisioned by a RealPresence Resource Manager system.
Directory Servers
Supported
Skype for Business
Server 2015
* To successfully call a phone number from the LDAP directory, the phone number must be stored in one of the
following formats:
• +Country Code.Area Code.Number
• +Country Code.(National Direct Dial Prefix).Area Code.Number
Polycom, Inc.
Authentication
Protocols
NTLM v2 only
Any of the following:
• NTLM v2 only
• Basic
• Anonymous
Proprietary
Authentication Protocol
NTLM v2 only
Setting Up a Polycom RealPresence Touch Device
Global Directory Groups
Contact groups but not
distribution lists
Not Supported
Not Supported
Global Directory Groups
Contact groups but not
distribution lists
Entry Calling
Information
Might include:
• SIP address (SIP URI)
Might include:
• 323 IP address (raw
IPv4 address, DNS
name, H.323 dialed
digits, H.323 ID, or H.
323 extension)
• SIP address (SIP URI)
• ISDN number
• Phone number*
Might include:
• 323 IP address (raw
IPv4 address, DNS
name, or H.323
extension)
• ISDN number
Entry Calling
Information
Might include:
• SIP address (SIP URI)
227