Audio Output Options - Polycom Trio 8800 User Manual

Microphone Mute Parameters
The following parameters configure microphone mute status alert tones.
Mute Status Alert Tone Parameters
Template
features.cfg
features.cfg

Audio Output Options

Polycom Trio 8500 and 8800 offer audio output and routing options.
By default, audio plays out on the Polycom Trio 8800 and 8500 system speaker. When you add video
capability by connecting and pairing the Polycom Trio 8500 or 8800 with a Polycom Trio Visual+ system,
you can choose to play out audio on connected external speaker and/or the TV/monitor speakers. You can
choose audio output options using the parameter up.audio.networkedDevicePlayout.
You can configure the following audio routing options:
● Polycom Trio 8800 or 8500 speaker only
● Polycom Trio™ Expansion Microphones
The expansion microphones include a 2.1 m | 7 ft cable that you can attach directly to the Polycom
Trio 8500 or 8800 to broaden its audio range to a total of 70 ft.
● Polycom Trio Visual+ using HDMI or a connected 3.5mm analog output
● Any combination of outputs available with the Polycom Trio system and Polycom Trio Visual+
Use the parameters in the following table to choose where audio is routed to for audio and video calls.
Configure Audio Output
Use the parameters in the following table to route audio.
Polycom, Inc.
Parameter
se.touchFeedback.enabled
call.mute.reminder.period
Permitted Description
0 - Does not play an alert tone
when the mute status is changed
on the Polycom 8800 or 8500
system.
1 - An alert tone is played when
the mute status is changed
either from the Polycom 8800,
8500, or far-end system.
The time interval in seconds to
play an alert tone periodically
when the Polycom 8800 or 8500
system is in the mute state.
5 (default)
5 - 3600
Audio Features
Change Causes
Restart or
Reboot
No
No
25