Table of Contents
Advertisement
MX10016 Power System
IN THIS SECTION
JNP10K-PWR-AC Power Supply LEDs | 68
JNP10K-PWR-DC Power Supply LEDs | 71
JNP10K-PWR-DC2 Power Supply LEDs | 73
The MX10016 supports AC, DC, high-voltage alternating current (HVAC) and high-voltage direct current
(HVDC) by offering the following power supplies:
JNP10K-PWR-AC
JNP10K-PWR-AC2
JNP10K-PWR-DC
JNP10K-PWR-DC2
CAUTION:
All of the power supplies are hot-insertable and hot-removable, field-replaceable units (FRUs). In the
MX10016, you can install up to 10 power supplies in the slots labeled PEM 0 through PEM 9 (top to
bottom) located in the rear of the chassis. You can install the power supplies in any slot.
The JNP10K-PWR-AC2 and JNP10K-PWR-DC2 PSMs require the enhanced power bus. To determine
whether your system has the standard power bus or the enhanced power bus, see
Table 13 on page 58
provides the specifications for these different power supplies.
Do not mix AC and DC power supplies in the same chassis.
Table 8 on page
40.
57
Advertisement
Table of Contents
