Cable Specifications For Console And Management Connections; Understanding Fiber-Optic Cable Signal Loss, Attenuation, And Dispersion - Juniper MX10016 Hardware Manual

Cable Specifications for Console and Management Connections

Table 46 on page 116 lists the specifications for the cables that connect the MX10016 router to a
management device.
NOTE: The MX10016 router can be configured with SFP management ports that support
1000BASE-SX transceivers.
Table 46: Cable Specifications for Console and Management Connections for an MX10016
Port on
MX10016 router Cable Specification
Console port RS-232 (EIA-232) serial
cable
Management port Category 5 cable or
equivalent suitable for
1000BASE-T operation

Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion

IN THIS SECTION
Signal Loss in Multimode and Single-Mode Fiber-Optic Cables | 117
Attenuation and Dispersion in Fiber-Optic Cable | 117
Cable Supplied
One 7-feet (2.13-meter) long
RJ-45 patch cable and RJ-45
to DB-9 adapter
One 7-feet (2.13-meter) long
RJ-45 patch cable
Maximum Device
Length Receptacle
7 feet RJ-45
(2.13 meters)
328 feet RJ-45
(100 meters)
116