Table of Contents
Advertisement
For the cooling system to function properly, the airflow around the chassis must be unrestricted. See
"MX10016 Cooling System" on page 44
If you are mounting an MX10016 router in a rack with other equipment, ensure that the exhaust from
other equipment does not blow into the intake vents of the chassis.
Leave at least 24 in. (61 cm) both in front of and behind the MX10016 for service personnel to remove
and install hardware components. To be NEBS GR-63 compliant, allow at least 30 in. (76.2 cm) in front
of the rack and 24 in. (61 cm) behind the rack.
RELATED DOCUMENTATION
General Safety Guidelines and Warnings | 273
General Site Guidelines
MX10016 Installation Overview | 127
MX10016 Power Planning
IN THIS SECTION
Power Requirements for MX10016 Components | 97
Calculating Power Requirements for an MX10016 | 97
JNP10K-PWR-AC Power Specifications | 102
JNP10K-PWR-AC2 Power Specifications | 103
MX10016 Power Cord Specifications | 104
JNP10K-PWR-DC Power Specifications | 112
JNP10K-PWR-DC2 Power Specifications | 112
MX10016 Grounding Cable and Lug Specifications | 113
MX10016 power specifications and requirements are described in the following topics. Use the information
to calculate the power consumption for the MX10016 and plan your configuration's power requirements.
for more information about the airflow through the chassis.
96
Advertisement
Table of Contents
