Table of Contents
Advertisement
NOTE:
If your laptop or PC does not have a DB-9 male connector pin and you want to connect
your laptop or PC directly to an MX10016 router, use a combination of the RJ-45 cable and RJ-45
to DB-9 adapter supplied with the device and a USB to DB-9 male adapter. You must provide the
USB to DB-9 male adapter.
Table 48: Console Port Connector Pinouts for an MX10016
Pin
1
2
3
4
5
6
7
8
USB Port Specifications for an MX10016
The following Juniper Networks USB flash drives have been tested and are officially supported for the
USB port in the MX10016 router:
RE-USB-1G-S—1-gigabyte (GB) USB flash drive
Signal
RTS output
DTR output
TOD output for PTP applications
TxD output
Signal oround
Signal oround
RxD input
DCD input
TOD iutput for PTP applications
CTS input
Description
Request to send
Data terminal ready
Time of day for Precision Time Protocol
(PTP). You can use DTR pins as a TOD
universal asynchronous
receiver/transmitter (UART) by using
breakout cables.
Transmit data
Signal ground
Signal ground
Receive data
Data carrier detect
Time of day for PTP. You can use DCD
pins as a TOD UART by using breakout
cables.
Clear to send
121
Advertisement
Table of Contents
