Cable Connections; Root-Straight Cable - Omron F3SG-SRB Series User Manual

Wiring and Installation

5-4-3. Cable Connections

Extension of the cable must be within a specified length. If it isn't, safety functions may not
work properly, resulting in danger.
For the restrictions on the cable extension, refer to 1-5-1. F3SG-SR Series.
Perform wiring according to the following procedure.
1.
Connect a gray Root-Straight Cable for Emitter (F39-JGC-L, sold separately) or Root-Plug Cable for
Extended for Emitter (F39-JGR3K-L, sold separately) to the emitter.
2.
When extending the cable length, connect a gray Extended Plug-Socket Cable for Emitter and/or
Extended Socket-Straight Cable for Emitter (F39-JG-L, sold separately) to the emitter-side Root-
Plug Cable for Extended.
3.
Connect a black Root-Straight Cable for Receiver (F39-JGC-D, sold separately) or Root-Plug Cable
for Extended for Receiver (F39-JGR3K-D, sold separately) to the receiver.
4.
When extending the cable length, connect a black Extended Plug-Socket Cable for Receiver and/or
Extended Socket-Straight Cable for Receiver (F39-JG-D, sold separately) to the receiver-side
Root-Plug Cable for Extended.

5-4-3-1. Root-Straight Cable

 Root-Straight Cable for Emitter (F39-JGC-L, sold separately)
2-M2.5 screw
31.6
<Internal wiring diagram>
Brown
Black
Blue
White
Yellow
F3SG-SR
292
User's Manual
16.4
Connector
24V/0V
TEST
0V/24V
COM(+)
OPERATING RANGE SELECT INPUT/COM(-)
L
Oil-resistant PVC-insulated round cable, dia. 6
minimum bending radius R5, 5-wire
(Cross section of conductor: 0.3 mm
(Unit: mm)
2 /insulator diameter: dia. 1.1 mm/AWG24)