Omron F3SG-SRB Series User Manual page 315

6.
Securely tighten screws to fix the Top/Bottom Bracket to the mounting position of the wall surface. (Fig.7)
Using one M8 screw
<Backside mounting>
M8
Screws to mount the brackets to the wall are not included.
7.
Power the emitter and receiver on to perform beam alignment.
Move the emitter and receiver from side to side (Fig. 8) to check the state of the beams
For more information on the beam alignment procedure, refer to 5-3-5. Beam Alignment Procedure.
Fig. 8
<Side mounting>
M5/M6
M8
Fig. 7
Using two M5 or M6 screws
<Backside mounting> <Side mounting>
M5/M6
Wiring and Installation
F3SG-SR
User's Manual
E
287