2-23-4. Setting with SD Manager 3
The user can make changes to the settings of this function by the SD Manager 3.
Function
Designated beam output
Setting by
Designated beam zone
Designated beam state
When outputting the light unblocked/blocked states of a designated beam, configure any one of the
output operation modes of auxiliary output or Area Beam Indicator (ABI) as designated beam output
information.
It is recommended that the Position 2 of the DIP Switch be set at OFF (DIP Switch Disabled).
Refer to Chapter 4 Setting with SD Manager 3 for more information on setting this function by the SD Manager 3.
Initial value
Disable
Manual
Bottom beam
-
Top beam
-
Light-ON
System Operation and Functions
Configurable value or numerical range
Enable/Disable
Manual/Teach-in
Any beam in 1-beam increments
Light-ON/Dark-ON
E
F3SG-SR
117
User's Manual