Omron F3SG-SRB Series User Manual page 143

Setting when selecting output information
ABI pattern Function
Red Output operation mode
Inverted signal output
Output pattern
Orange Output operation mode
Inverted signal output
Output pattern
Green Output operation mode
Inverted signal output
Output pattern
*1. It is unable to use input signal linkage and the muting function together. To enable the setting of input signal linkage, disable
the muting function.
In addition, for the following functions, setting parameters are kept individually in each case that the muting function is set
enabled or disabled. When changing the muting state from enabled to disabled or vice versa using SD Manager 3, confirm
the setting of the respective functions again.
Functions influenced:
External device monitoring, start interlock, restart interlock, and auxiliary output
*2. Configurable items are equal to the information assigned to the auxiliary output. For the details of the information assigned to
the auxiliary output, refer to Section 2-12. "Auxiliary Output."
It is recommended that the Position 2 of the DIP Switch be set at OFF (DIP Switch Disabled).
For the details of change of setting parameters using SD Manager 3, refer to Chapter 4 Setting with SD Manager 3.
Initial value
Safety output information *2
Enabled Enabled/disabled
Solid-ON Solid-ON, ON 1 time, ON 2 times, and ON 3 times
Stable state information *2
Enabled Enabled/disabled
ON 1 time Solid-ON, ON 1 time, ON 2 times, and ON 3 times
Safety output information *2
Disable Enabled/disabled
Solid-ON Solid-ON, ON 1 time, ON 2 times, and ON 3 times
System Operation and Functions
Configurable item
E
F3SG-SR
115
User's Manual