Omron F3SG-SRB Series User Manual page 310

Wiring and Installation
4.
Fully loosen the Mounting Screw (hexagon socket head cap screw (M4×22)) of the Side-Mount
Bracket. (Fig. 4) Then slide the hooks of the Brackets (1) and (2) in the groove of the backside of the
sensor housing. (Fig. 5)
Loosen
Mounting Screw
(hexagon socket head
cap screw (M4×22))
5.
Securely tighten the Mounting Screw to fix the Side-Mount Bracket to the sensor housing. The
recommended torque to tighten the Mounting Screw of the Side-Mount Bracket is 3.0 N•m. (Fig. 6)
Securely tighten
Mounting Screw
Tightening screws with a torque that considerably exceeds the recommended torque may cause failure.
F3SG-SR
282
User's Manual
Bracket (1)
Fig. 4
Mounting Screw
Fig. 6
Bracket (2)
Fit the hooks of Side-Mount
Brackets to the groove of the
backside of the housing
Hook
Fig. 5