Omron F3SG-SRB Series User Manual page 257

No. Function
1 Error Log Information
(Receiver)
2 Error Log (Emitter) *
3 Show error descriptions
4 Save maintenance
information
* The error log information of the emitter is displayed only when the sensor is connected in the Wired Synchronization.
• Refer to 8-1-2. LOCKOUT State for more information on the error codes and descriptions.
• Refer to 2-26-4. Power-ON Time for more information on the accumulated power-on time.
• Error logs are only displayed for a sensor segment selected in the Target sensor section.
• Up to 50 past errors can be recorded. Up to last five logs are displayed without logging in.
• When the F3SG-SR is in a cascade connection, select a desired sensor segment from the [Target sensor]
button
Shows error logs including error codes, error descriptions and accumulated power-on time
at the time when errors occurred, with the most recent errors first for the receiver.
Shows error logs including error codes, error descriptions and accumulated power-on time
at the time when errors occurred, with the most recent errors first for the emitter.
Click an error to show details, cause and measures of the event.
Saves error and warning logs, Intelligent Tap log, power-on time, accumulated power-on
time, load switching frequency and accumulated load switching frequency as a .csv file.
in the top right corner of the screen.
Setting with SD Manager 3
Description
E
F3SG-SR
229
User's Manual