Omron F3SG-SRB Series User Manual page 194

Setting with SD Manager 3
 Pairing (Connection Verification)
Paring is the process required for the Bluetooth
wiring technology to recognize and connect with each other.
Indications and operations of the pairing process are different depending on a Bluetooth
Always refer to instruction manuals of such a device when pairing the devices.
When the Bluetooth
Bluetooth
Once the Bluetooth
The following is an example of the pairing process using a Windows-10-based PC.
This example assumes that a Bluetooth
[Example]
1.
Confirm that the Bluetooth
ON the power to start up the F3SG-SR and Intelligent Tap.
2.
Right-click the [Start] button of Windows, and click [Devices] on the [Settings] menu.
3.
Click [Bluetooth & other devices] and click [Add Bluetooth or other device].
4.
On the screen to select the type of the device added, click [Bluetooth].
F3SG-SR
166
User's Manual
Communication Unit and a Bluetooth
®
Communication Unit. These must be paired in advance.
®
Communication Unit and a Bluetooth
®
® communication unit is connected with the Intelligent Tap correctly, and turn
®
Communication Unit and a device with Bluetooth
device are not paired, it is not possible to connect to the
®
device are paired, it is not necessary to pair them again.
®
® adapter is incorporated or installed in the PC.
®
® device used.