Checking Led Activity On The Dual Network Interface Card - Avaya S8500 Series Job Aids For Field Replacements

Job Aid: Replacing the Avaya S8500 dual network interface

Checking LED activity on the dual network interface card

When the S8500/B/C server is back in service:
1. Check the LEDs on each port of the dual NIC for network activity:
S8500C: see
l
S8500B: see
l
S8500: see
l
Figure 46: S8500C rear panel
Figure notes:
1. Power cord connector
2. SAMP power
3. USB connection (to USB modem)
4. Ethernet (not used)
5. SAMP services port
6. SAMP card
7. Dual NIC
8. Ethernet 4
9. Ethernet 3
2. For Ethernet port 0, 1, 3, or 4 if the:
LED is off: there is a 10 BASE-T active link.
l
LED is green: there is a 100 BASE-T active link.
l
LED is orange: there is a 1000 BASE-T active link.
l
152 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
Figure 46: S8500C rear panel
Figure 47: S8500B rear panel LEDs
Figure 48: S8500 rear panel dual NIC LEDs
1
2
Slot 1
h2msb8cc LAO 031706
on page 152.
on page 153.
3 5
7
4
6 8
1
11 13
12
10. Mouse connector
11. USB port
12. USB port
13. Ethernet 1
14. Ethernet 2
15. Video connector
16. Serial connector
17. Keyboard connector
on page 153.
9
10
Slot 2
2
15 17
14 16