Checking Led Activity On The Dual Nic - Avaya S8500 Installing And Configuring

Chapter 4: Media server configuration

Checking LED activity on the dual NIC

When the S8500 Media Server is in service, check the LEDs on each port of the dual network
interface card (NIC) for connection and activity. Ensure that the LED on the left that indicates
connection is lit and the LED on the right that indicates activity is lit or blinking. For dual-NiC
LED information, see
Note:
The dual NIC is optional with the S8500B but ships installed with the S8500C.
Note:
The dual NIC is located on the rear panel in different positions on the S8500B and
S8500C but the port LEDs are the same. See
page 15 for a diagram of the S8500C back panel.
Figure 10: S8500B rear panel dual-NIC LEDs
Figure notes:
1. Network activity LED (TX/RX)
54
Installing and Configuring the Avaya S8500 Media Server
Figure 10: S8500B rear panel dual-NIC
2. Connection rate:
LEDs.
Figure 2: S8500C back panel
1
1
2
– Off: a 10BaseT active link
– Green: a 100BaseT active link
– Orange: a 1000BaseT active link
on
2
h3msble6 KLC 093004
June 2006