Route Transfer] Window; Application] Window - Furuno FMD-3200-BB Instruction Manual

1. INITIAL SETTING AND ADJUSTMENT
Menu item/
interactive field
[Source]
[Location]
[Initial Value of Se-
quence No.]
4. Click [Save] on the info bar. Several confirmation messages appear. Click [OK] to
reboot the system. To discard all changes, click [Discard Changes].
1.2.4

[Route Transfer] window

1. Access the [Common Installation Setting] menu and click [Basic Setting] on the
tab bar.
2. Click [Route Transfer] on the menu bar.
3. To transfer data to a specified network, select [Connected] from the [Connection]
pull-down list.
[Connection]
[Transmission Rate]
[Network]
[Destination]
[Initial Value of Sequence
No.]
4. Click [Save] on the info bar. Several confirmation messages appear. Click [OK] to
reboot the system. To discard all changes, click [Discard Changes].
1.2.5

[Application] window

1. Access the [Common Installation Setting] menu and click [Basic Setting] on the
tab bar.
2. Click [Application] on the menu bar.
1-10
Set the status and information text, max. 16 characters.
Set the status and information text, max. 32 characters.
Set the initial value for the binary transmission sequence
number (IEC61162-450 compliant) to be used when
transmitting video to a VDR.
Menu item
Select [Connected] to transfer the data.
Set the transmission rate.
Select the destination network for route data.
Set the IP address and port of the destination.
Set the initial value for the binary transmission se-
quence number (IEC61162-450 compliant) to be
used when transferring route data to a device(s)
connected to the LAN.
Description
Description