Furuno FMD-3200-BB Instruction Manual page 81

Menu item
Items in the view area
[Name]
[Show]
[Copy From]
[Components]
[Layout]
Conning layout sheet and useable monitor
Layout Sheet
Conning (3x6)
Wide Conning (4x6)
Side Conning (1x9)
Mini Conning (1x5)
How to display the side conning display (ECDIS only)
To display the side conning display with the FMD-300, do as follows:
1. In the chart mode, press Ctrl, Shift and t keys simultaneously on the control unit
or keyboard.
The password input dialog box appears.
2. Enter the password and click [OK].
Note: The service mode remains enabled until you press Ctrl, Shift and t keys
simultaneously or reboot the unit.
3. Click [MENU] to open the menu.
Enter the name of the sheet displayed on the view area. The
sheet name entered here appears on the status bar of the con-
ning display.
Check the checkbox to show the sheet name on the status bar
of the conning display.
Copy a conning layout sheet to another sheet.
Select the components to show on the conning display. The
components are available in three sizes: [Small], [Medium],
[Large]. The [Small] components occupy one block. The [Medi-
um] components occupy two blocks. The [Large] components
occupy three or more blocks. Check the size of the component
to show on the [Components] window. Select the component
and click it to show the component on the [Layout] window.
You can configure the layout and data to show on the conning
display. Drag and drop the components to configure the layout.
Click to delete a component from the [Layout] window. To se-
lect the data source for a component, click
advanced settings window. See the procedure on
section 1.14.1.
MU-190, MU-231, MU-201 CE, JH 19T14FUD, JH 20T17FUD,
JH 23T12FUD, JH 23T14FUD, HD 19T21MMD
MU-270W, JH 26T11MMD, HD 24T21MMD, HD 24T22FUD,
HD 26T21MMD, HD 26T22MMD, HD 26T22FUD, HD 27T22-
FUD, HD 32T22FUD, HD 55T22FUD, NI WA460-01, NI
WA270-01
Available with any monitor.
1. INITIAL SETTING AND ADJUSTMENT
Explanation
Monitor
to display the
1-75