Furuno FMD-3200-BB Instruction Manual page 9

4. Enter the password and click [OK]. [Service Mode] is shown at the bottom left po-
sition of the [Settings] window.
For RCU-024: Use the keyboard on the control unit to enter the password.
For RCU-025/026: Use the software keyboard on the display to enter the pass-
word.
5. Click [SERVICE MODE] on the status bar, and then select [Common Installation
Setting]. The message shown below appears.
6. Click [OK] to activate the web browser and show the dialog box asking for ID and
password.
7. Enter the ID and password correctly then click the [Login] button.
The [Common Installation Setting] menu appears.
1.1.3 [Common Installation Setting] menu contents
Note: Click [Exit] to close and logout from the [Common Installation Setting] menu.
You can close and logout by clicking
not be re-accessed for a while.
Tab bar
Menu bar*
*: Selected item is highlighted in blue.
The selected tab is highlighted in blue on the tab bar. The view area and menu bar
change according to the tab selected.
Click [
Note: If the tab bar does not move when clicking either
cache.
(or )] at the tab bar to shift the tab to the left (or right).
1. INITIAL SETTING AND ADJUSTMENT
on the web browser. However the menu can
or
Click here to close and
logout from the
[Common Installation
Setting] menu.
View area
Info bar
, clear the browser
1-3