Furuno FMD-3200-BB Instruction Manual page 121
Setting and adjustments
Hide thumbs
Also See for FMD-3200-BB:
- Operator's manual (12 pages) ,
- Installation manual (143 pages) ,
- Manual (46 pages)
Table of Contents
Advertisement
17. Enter "write" and press the Enter key.
Reboot the HUB-3000 after performing "write" to enable the querier function of
HUB-3000.
Switch# config
Switch_config# ip igmp-snooping querier
Switch_config# show ip igmp-snooping
Global IGMP snooping configuration:
-----------------------------------
Globally enable
VLAN nodes
Dlf-frames filtering : Enabled
Sensitive
Querier
Querier address
Router age
Response time
Switch_config# write
Saving current configuration...
OK!
18. Reboot the HUB-3000.
19. Refer to steps 6 to 11 to confirm the configuration of the HUB-3000.
Confirm that "Enabled" appears in the "Querier" field. If not, retry the IGMP querier
setting.
4. HUB-3000 IGMP QUERIER SETTING
: Enabled
: 1
: Disabled
: Enabled
: 10.0.0.200
: 260 s
: 15 s
4-3
Hide quick links:
Advertisement
Table of Contents
