Furuno FMD-3200-BB Instruction Manual page 34

1. INITIAL SETTING AND ADJUSTMENT
Connector No.
Connector No.
8. Check the checkbox for [Channel No.] to set the items referring to step 9 of
section 1.4.2.
9. Click [Digital Output] on the menu bar.
[Channel 01-01] to [Channel 10-08] are shown on the display. Each Sensor
Adapter MC-3030D has eight input ports. When one Sensor Adapter MC-3030D
is connected to the MC-3000S, [Channel 01-01] to [Channel 01-08] can be used.
When ten Sensor Adapters MC-3030D are connected, [Channel 01-01] to [Chan-
nel 10-08] can be used.
The connector no. on the MC-3030D board and the corresponding serial channel
are shown below.
Connector No.
Connector No.
1-28
No.1 Sensor Adapter MC-3020D
Channel No.
Channel 01-01
J3
Channel 01-02
Channel 01-03
J4
Channel 01-04
No.2 Sensor Adapter MC-3020D
Channel No.
Channel 02-01
J3
Channel 02-02
Channel 02-03
J4
Channel 02-04
No.1 Sensor Adapter MC-3030D
Channel No.
Channel 01-01
J3
Channel 01-02
Channel 01-03
J4
Channel 01-04
No.2 Sensor Adapter MC-3030D
Channel No.
Channel 02-01
J3
Channel 02-02
Channel 02-03
J4
Channel 02-04
Connector No. Channel No.
Channel 01-05
J5
Channel 01-06
Channel 01-07
J6
Channel 01-08
Connector No. Channel No.
Channel 02-05
J5
Channel 02-06
Channel 02-07
J6
Channel 02-08
Connector No. Channel No.
Channel 01-05
J5
Channel 01-06
Channel 01-07
J6
Channel 01-08
Connector No. Channel No.
Channel 02-05
J5
Channel 02-06
Channel 02-07
J6
Channel 02-08