Furuno FMD-3200-BB Instruction Manual page 24

1. INITIAL SETTING AND ADJUSTMENT
3. Click the [Details] button and set the items referring to the following table.
Item
[Subsystem]
[System Alert ID]
[Alert Information
Source]
[ALF Text Infor-
mation]
[Planning]*
1-18
For ECDIS
Set up sharing of sensor data through HUB-3000. For subsystem de-
tails, see page AP-3.
When sharing sensor data: Set the value. Setting range: "A" to "Z".
To not share the sensor data: Keep the default setting ("---").
The identification number that assigned in the system is shown in
this field. Do not change the setting.
Set the source of alert definition to show on the display when the
alert message is received in an ALF sentence.
• [Alert Definition]: Show the alert definition registered to the proces-
sor unit.
• [Alert Sentence]: Show the alert definition included in the ALF sen-
tence.
Select the type of the 2/2 packet text information of ALF sentence.
• [All Alert Name]: Select this item if all alert text is included in the 2/
2 packet of the ALF sentence. The text information for the 2/2
packet of the ALF sentence is shown as the alert name in the alert
list/log.
• [Remaining Alert Name]: Select this item if the alert text is divided
in 1/2 and 2/2 packets of the ALF sentence. The text information
for both the 1/2 and 2/2 packets of the ALF sentence is shown as
the alert name in the alert list/log.
• [Decision Support]: Select this item if the alert details information
(Decision Support) is included in the 2/2 packet of the ALF sen-
tence. The text information for the 2/2 packet of the ALF sentence
is shown as the alert details in the alert list/log.
Check the checkbox to assign the planning ECDIS. The planning
ECDIS is a master unit to share the route data. For details of sharing
the route data, see the operator's manual of the ECDIS and Chart
Radar.
Note: Alerts are not displayed on the planning ECDIS.
For Chart Radar
Remarks