Furuno FMD-3200-BB Instruction Manual page 103

• Vertical Graph
[Title]: Enter the title of the component.
[Label]: Enter the title of [Primary] or [Secondary].
[Source]: Select the data source of [Primary] or [Secondary].
[Source (sub)]: Set the other data source in the same range as the data of [Primary].
The [Source (sub)] appears only when the source of [Secondary] is not entered.
[Unit]: Set the unit in the [Primary] or [Secondary].
[Scale │ Range]: Set the display range of the X-coordinate. [Primary] is for the
range of the upper of the graph, [Secondary] is for the range of the lower of the
graph.
[Time Span]: Set the display range of the Y-coordinate.
[Sample Interval]: Set the interval of the graph plot.
[Scale Resolution]: Select the scale resolution of the graph.
[Change button]: Check the checkbox to show the [Change] button. Click the
[Change] button to show the [Vertical Graph (Middle)] hidden behind. Check the
checkbox of [Show] in [Change Button] of the component hidden behind.
[Decimal Place]: Check the checkbox to show the value after decimal point.
[Secondary (Y2) Scale]: Check the check box to show the value input from the data
source of [Secondary].
[Mathematical Sign (Scale)]: Check the checkbox to show the minus sign (-) when
the value of the X-coordinate is minus.
[Mathematical Sign (Value)]: Check the checkbox to hide the minus sign (-) when
the value above graph is minus.
• Vertical Heading Graph
[Title]: Enter the title of the component.
[Label]: Enter the title of [Heading] or [Other].
1. INITIAL SETTING AND ADJUSTMENT
1-97