TRUNK LID
TRUNK LID REMOVAL/INSTALLATION
WARNING:
Removing the stay damper without supporting the trunk lid can be dangerous. The trunk lid may fall and
•
injure you. Be sure to open the trunk lid completely and support it securely before removing the stay
damper.
1. Disconnect the negative battery cable.
2. Disconnect the trunk lid wiring harness connector, then take the trunk lid harness out from the vehicle.
3. Remove the clips that secure the trunk lid wiring harness.
4. Pry off the stay damper band using a flathead screwdriver.
(w)
RX-8 Body
Page 5