DTC B1318 [ABS]
CAUTION:
If the battery voltage drops during the inspection, B1318 will be output as a current malfunction and the
•
proper diagnosis cannot be made. Be careful not to let the battery voltage drop.
DTC
B1318
DETECTION
CONDITION
POSSIBLE CAUSE
Power supply
The voltage at ABS HU/CM terminal Z is approx. 10 V or less .
•
ENGINE 15 A fuse malfunction
•
Open circuit or short to ground in the wiring harness between the ABS
•
HU/CM terminal Z and the battery
Open circuit or faulty ground in the wiring harness between the ABS HU/CM
•
terminal AC and the body ground
Battery deterioration
•
Generator malfunction
•
Poor connection at connectors (female terminal)
•
(w)
RX8 - Brakes
Page 88