Mazda RX-8 Manual page 1832

WINDSHIELD WIPER ARM AND BLADE
WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
1 Cap
2 Nut
Windshield wiper arm
3
(See Windshield Wiper Arm Installation Note .)
4 Windshield wiper blade
5 Rubber brush
2. Install in the reverse order of removal.
3. Adjust the windshield wiper arm and blade.(See WINDSHIELD WIPER ARM AND BLADE
ADJUSTMENT .)
Windshield Wiper Arm Installation Note
1. Clean the windshield wiper arm connector shafts using a wire brush before installing the windshield
wiper arms.
(w) RX-8 Body
Page 114