Rear Package Trim Removal/Installation - Mazda RX-8 Manual

Hide thumbs Also See for RX-8:

Table of Contents

REAR SIDE TRIM

REAR PACKAGE TRIM REMOVAL/INSTALLATION

1. Remove the following parts:

a. Rear seat(See REAR SEAT REMOVAL/INSTALLATION .)

b. Inner scuff plate(See INNER SCUFF PLATE REMOVAL/INSTALLATION .)

c. Tire house trim(See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)

d. Rear pillar trim(See REAR PILLAR TRIM REMOVAL/INSTALLATION .)

2. Remove the rear package side trim fasteners.

3. Pull the rear package side trim upward and detach clips A from the body.

4. Detach tabs B and pin C from the rear package center trim.

5. Detach tabs D from the body and remove the rear package side trim.

6. Pull the rear package center trim upward and detach clips A, tabs E, and locator pin F from the body.

7. Detach tabs D from the body and remove the rear package center trim.

8. Install in the reverse order of removal.