Mazda RX-8 Manual page 1448

ABS HYDRAULIC UNIT/CONTROL MODULE
ABS HU/CM REMOVAL/INSTALLATION
CAUTION:
The internal parts of the ABS HU/CM could be damaged if dropped. Be careful not to drop the ABS
•
HU/CM. Replace the ABS HU/CM if it is subjected to an impact.
1. Remove the front suspension tower bar. (See
REMOVAL/INSTALLATION
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
1 Connector
2 Brake pipe
3 Nut
4 ABS HU/CM
5 Stud
FRONT SUSPENSION TOWER BAR
.)
(w) RX8 - Brakes
Page 34