Mazda RX-8 Manual page 2065

to create an unauthorized spare key. This function is for use by rental car or other companies with
vehicle fleets.
Procedure
1. Using any key, turn the ignition switch to the ON position. (Either a valid or an unregistered key can be
used.)
NOTE:
When using an unregistered key, although the security light flashes and DTC 15 is displayed,
•
this does not indicate an improper procedure. Continue to perform the procedure as indicated.
2. Connect the WDS or equivalent to the DLC-2.
3. Select "Body/Security/PATS function" from the screen menu of the WDS or equivalent.
4. Perform security access as indicated on the WDS or equivalent screen. (See No.6 Security Access
Procedure .)
5. Select either "Customer Spare Key Programming Enable" or "Customer Spare Key Programming
Disable" from the screen menu of the WDS or equivalent. Depending on the selected menu, the
additional key registration method is as shown below:
Setting
Customer Spare Key Programming
Enable
Customer Spare Key Programming
Disable
X
Procedure is possible
-
Procedure is not possible
6. After verifying that the PATS function menu is displayed again on the WDS or equivalent screen, select
"Exit" to complete the WDS or equivalent function.
Additional key registration method
Procedure using two valid
keys
X
-
Procedure using the WDS or
equivalent
X
X
(w) RX-8 Body
Page 347