1. Inspect the fuel gauge by setting it to check code 23 of the input/output check mode.(See
INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODE .)
Water temperature gauge
1. Inspect the water temperature gauge by setting it to check code 25 of the input/output check mode.(See
INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODE .)
Oil pressure gauge
1. Inspect the oil pressure gauge by setting it to check code 28 of the input/output check mode.(See
INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODE .)
INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODE
NOTE:
In this mode, it is possible to verify the items in the following chart.
•
Check Code Table
Check code Check item
01
Buckle switch
04
Door switch
08
TNS relay
12
Speedometer (LCD)
13
Tachometer
14
Buzzer
16
Fuel-level warning light
18
Ignition key illumination
22
Fuel gauge sender unit
23
Fuel gauge
25
Water temperature gauge
26
Odometer/tripmeter (LCD)
•
Related items
Buckle switch
Lights-on reminder warning alarm
•
Key reminder warning alarm
•
Power door lock system
•
Ignition key illumination system
•
Interior light control
•
Lights-on reminder warning alarm
•
Each illumination light
•
Speedometer
Tachometer
Buzzer
Fuel-level warning light
Ignition key illumination system
Fuel gauge
Fuel gauge
Water temperature gauge
Odometer/tripmeter (LCD)
•
(w)
RX-8 Body
Page 395