Instrument Cluster Inspection - Mazda RX-8 Manual

1 Instrument cluster unit
2 Lens
3 Cover
4 Clip
5 Meter hood
2. Assemble in the reverse order of disassembly.

INSTRUMENT CLUSTER INSPECTION

Speedometer
Using the input/output check mode
1. Inspect the speedometer by setting it to check code 12 of the input/output check mode.(See
INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODE .)
Using a speedometer tester
1. Adjust the tire pressure to the specification.
2. Using a speedometer tester, verify that the tester reading is as indicated in the table below.
Speedometer tester indication (km/h) Allowable range (km/h)
20
40
60
80
100
120
140
Speedometer tester indication (mph) Allowable range (mph)
1921
3941
5961
7981
99101
119121
139141
(w) RX-8 Body
Page 393