AUTOMATIC TRANSMISSION OUTPUT
(SOLENOID/INDICATOR LIGHT)
SOLENOID VALVE INSPECTION
CAUTION:
Water or foreign material entering the connector can cause poor connections or corrosion. Be sure that
•
water or foreign material do not enter the connector when disconnecting it.
Resistance Inspection (On-Vehicle)
1. Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION .)
2. Remove the battery cover.
3. Disconnect the negative battery cable.
4. Remove the catalytic converter. (See EXHAUST SYSTEM REMOVAL/INSTALLATION .)
5. Remove the insulator.
6. Disconnect the solenoid valve connector.
7. Measure the resistance between the following terminals.
(w)
RX-8 Transmission (Manual & Auto)
Page 339